9-CHANNEL FORD BRONCO | AUDIOPHILE SYSTEM
Ford Bronco Audiophile Upgrade Package with Audiofrog and Mosconi PICO
An Ultra Upgrade for your in-car sound experience with our comprehensive Ford Bronco Audiofrog GB upgrade, meticulously designed to deliver unmatched sound quality, depth, and clarity. This system features top-tier Audiofrog Audiophile speakers powered by a Mosconi Pico and mObridge DSP amplification setup, ensuring every note is heard precisely.
System Breakdown:
Front Dash Speakers – Audiofrog GB10 Tweeters (1”): Sealed polyester tweeters rated at 75W RMS (4 ohms) with an output range finely tuned for crystal-clear highs.
Front Dash Midrange – Audiofrog GB25 Midrange Drivers (2.5”): These high-performance midrange drivers, with neodymium motors, handle 100W RMS (300W max) and operate in the 200Hz+ range, filling your cabin with rich, detailed mids.
Front Kick Panels – Audiofrog GB60 Midbass (6.5”): Placed in the front kick panels, these midbass speakers deliver 100W RMS (300W max), filling the lower frequencies for a full-bodied sound experience from 70Hz and up.
Rear Speaker Pods—Audiofrog GS62 Coaxials (6.5”): These 70W RMS speakers provide robust rear-fill and cover a broad frequency range from 50Hz to 20kHz, creating an immersive, balanced soundstage.
Amplification and Processing:
mObridge Ford A2B 9-Channel Amp with DSP Integration: This plug-and-play amplifier provides 75W for six channels, 150W for two front channels, and a 450W subwoofer channel at 2 ohms. The DSP actively manages and enhances audio signals for clarity, delivering power and precision tailored for Ford’s A2B system.
Mosconi Pico 1 Mono Amplifier: Why not use the MoBridge mono power? Becuase this will do things #1 gets amother power supply and when the BASS is banging it wont draw (take away) from the highs. This makes the highs keep playing at full power while the state-of-the-art amp design by Mosconi delivers max power to the subwoofer. Powering the subwoofer with 750W at 2 ohms, this Class D mono amp ensures clean, powerful bass to drive low frequencies without distortion.
Wavtech BassRestor Processor: Designed to restore bass notes lost in factory tuning, this processor features adjustable effect width and frequency, enhancing low-end response for a richer, fuller bass experience. Most importantly, it will give you the ability to raise and lower the low bass notes to how you like them, depending on your mood.
Subwoofer—Trulli Audio TD10S (10”): This 600W 2-ohm subwoofer, with a mounting depth of 2.2 inches, delivers deep, punchy bass to round out the system and add impact to every track. Not shown but included is a bandpass sub enclosure, which will maximize the bass with the top on or off.
Experience Double the Power of Typical OEM Systems: This upgraded setup delivers twice the power of most factory-amplified systems, providing an audio experience that rivals professional-grade sound. The system also includes built-in high-level inputs with the Wavtech amplifier to retain factory DSP tuning, ensuring a noise-free, ultra-clean signal without additional adapters.
Ford Bronco Audiophile Upgrade Package with Audiofrog and Mosconi PICO
An Ultra Upgrade for your in-car sound experience with our comprehensive Ford Bronco Audiofrog GB upgrade, meticulously designed to deliver unmatched sound quality, depth, and clarity. This system features top-tier Audiofrog Audiophile speakers powered by a Mosconi Pico and mObridge DSP amplification setup, ensuring every note is heard precisely.
System Breakdown:
Front Dash Speakers – Audiofrog GB10 Tweeters (1”): Sealed polyester tweeters rated at 75W RMS (4 ohms) with an output range finely tuned for crystal-clear highs.
Front Dash Midrange – Audiofrog GB25 Midrange Drivers (2.5”): These high-performance midrange drivers, with neodymium motors, handle 100W RMS (300W max) and operate in the 200Hz+ range, filling your cabin with rich, detailed mids.
Front Kick Panels – Audiofrog GB60 Midbass (6.5”): Placed in the front kick panels, these midbass speakers deliver 100W RMS (300W max), filling the lower frequencies for a full-bodied sound experience from 70Hz and up.
Rear Speaker Pods—Audiofrog GS62 Coaxials (6.5”): These 70W RMS speakers provide robust rear-fill and cover a broad frequency range from 50Hz to 20kHz, creating an immersive, balanced soundstage.
Amplification and Processing:
mObridge Ford A2B 9-Channel Amp with DSP Integration: This plug-and-play amplifier provides 75W for six channels, 150W for two front channels, and a 450W subwoofer channel at 2 ohms. The DSP actively manages and enhances audio signals for clarity, delivering power and precision tailored for Ford’s A2B system.
Mosconi Pico 1 Mono Amplifier: Why not use the MoBridge mono power? Becuase this will do things #1 gets amother power supply and when the BASS is banging it wont draw (take away) from the highs. This makes the highs keep playing at full power while the state-of-the-art amp design by Mosconi delivers max power to the subwoofer. Powering the subwoofer with 750W at 2 ohms, this Class D mono amp ensures clean, powerful bass to drive low frequencies without distortion.
Wavtech BassRestor Processor: Designed to restore bass notes lost in factory tuning, this processor features adjustable effect width and frequency, enhancing low-end response for a richer, fuller bass experience. Most importantly, it will give you the ability to raise and lower the low bass notes to how you like them, depending on your mood.
Subwoofer—Trulli Audio TD10S (10”): This 600W 2-ohm subwoofer, with a mounting depth of 2.2 inches, delivers deep, punchy bass to round out the system and add impact to every track. Not shown but included is a bandpass sub enclosure, which will maximize the bass with the top on or off.
Experience Double the Power of Typical OEM Systems: This upgraded setup delivers twice the power of most factory-amplified systems, providing an audio experience that rivals professional-grade sound. The system also includes built-in high-level inputs with the Wavtech amplifier to retain factory DSP tuning, ensuring a noise-free, ultra-clean signal without additional adapters.
Ford Bronco Audiophile Upgrade Package with Audiofrog and Mosconi PICO
An Ultra Upgrade for your in-car sound experience with our comprehensive Ford Bronco Audiofrog GB upgrade, meticulously designed to deliver unmatched sound quality, depth, and clarity. This system features top-tier Audiofrog Audiophile speakers powered by a Mosconi Pico and mObridge DSP amplification setup, ensuring every note is heard precisely.
System Breakdown:
Front Dash Speakers – Audiofrog GB10 Tweeters (1”): Sealed polyester tweeters rated at 75W RMS (4 ohms) with an output range finely tuned for crystal-clear highs.
Front Dash Midrange – Audiofrog GB25 Midrange Drivers (2.5”): These high-performance midrange drivers, with neodymium motors, handle 100W RMS (300W max) and operate in the 200Hz+ range, filling your cabin with rich, detailed mids.
Front Kick Panels – Audiofrog GB60 Midbass (6.5”): Placed in the front kick panels, these midbass speakers deliver 100W RMS (300W max), filling the lower frequencies for a full-bodied sound experience from 70Hz and up.
Rear Speaker Pods—Audiofrog GS62 Coaxials (6.5”): These 70W RMS speakers provide robust rear-fill and cover a broad frequency range from 50Hz to 20kHz, creating an immersive, balanced soundstage.
Amplification and Processing:
mObridge Ford A2B 9-Channel Amp with DSP Integration: This plug-and-play amplifier provides 75W for six channels, 150W for two front channels, and a 450W subwoofer channel at 2 ohms. The DSP actively manages and enhances audio signals for clarity, delivering power and precision tailored for Ford’s A2B system.
Mosconi Pico 1 Mono Amplifier: Why not use the MoBridge mono power? Becuase this will do things #1 gets amother power supply and when the BASS is banging it wont draw (take away) from the highs. This makes the highs keep playing at full power while the state-of-the-art amp design by Mosconi delivers max power to the subwoofer. Powering the subwoofer with 750W at 2 ohms, this Class D mono amp ensures clean, powerful bass to drive low frequencies without distortion.
Wavtech BassRestor Processor: Designed to restore bass notes lost in factory tuning, this processor features adjustable effect width and frequency, enhancing low-end response for a richer, fuller bass experience. Most importantly, it will give you the ability to raise and lower the low bass notes to how you like them, depending on your mood.
Subwoofer—Trulli Audio TD10S (10”): This 600W 2-ohm subwoofer, with a mounting depth of 2.2 inches, delivers deep, punchy bass to round out the system and add impact to every track. Not shown but included is a bandpass sub enclosure, which will maximize the bass with the top on or off.
Experience Double the Power of Typical OEM Systems: This upgraded setup delivers twice the power of most factory-amplified systems, providing an audio experience that rivals professional-grade sound. The system also includes built-in high-level inputs with the Wavtech amplifier to retain factory DSP tuning, ensuring a noise-free, ultra-clean signal without additional adapters.
